Kenwood TK-8180 User Manual
14
S
CAN
R
EVERT
You can select Revert zones and channels/ group IDs using the Zone and
CH/GID keys.
CH/GID keys.
Eight types of Scan Reverts which can be programmed by your dealer are
available.
available.
• Last Called Revert: The last zone/ group ID received is assigned as the new revert
zone and group ID.
• Last Used Revert: The last zone/ group ID responded to is assigned as the new
revert zone and group ID.
• Selected: The last zone/ group ID selected is assigned as the new revert zone and
group ID.
• Selected + Talkback: If the zone/ group ID has been changed during Scan, the newly
selected zone/ group ID is assigned as the new revert zone and group ID. The
transceiver “talks back” on the current receive group ID.
transceiver “talks back” on the current receive group ID.
• Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either
Priority 1 or Priority 2), this channel is the revert zone and channel.
• Priority 1 + Talkback/ Priority2 + Talkback: If your dealer has programmed a
Priority channel (either Priority 1 or Priority 2), this channel is the revert zone and
channel. The transceiver “talks back” on the current receive channel.
channel. The transceiver “talks back” on the current receive channel.
Note: “Priority” and “Priority + Talkback” are not available for Trunking Systems.
P
RIORITY
S
CAN
A Priority channel must be programmed in order for Priority Scan to function.
The transceiver will automatically change to the Priority channel when a signal is
received on it, even if a signal is being received on a normal channel.
received on it, even if a signal is being received on a normal channel.
• The indicator represents the Priority 1 channel.
• The indicator represents the Priority 2 channel.
• The indicator represents both the Priority 1 and Priority 2 channel.
Note: Priority cannot be programmed onto the group ID of a Trunking zone; it can be used only on
channels of Conventional zones.
channels of Conventional zones.
G
ROUP
S
CAN
Group Scan is useful when more than one channel/ group ID is programmed in a
zone. Group Scan is set by your dealer on request. It scans the revert groups
as well as groups that are allowed to be scanned.
zone. Group Scan is set by your dealer on request. It scans the revert groups
as well as groups that are allowed to be scanned.
When a call is received, the group indicator shows the channel/ group ID, and
that group becomes the revert group. Simply press the PTT switch to respond to
the call.
that group becomes the revert group. Simply press the PTT switch to respond to
the call.