ZyXEL Communications ZYWALL10 User Manual
ZyWALL 10 Internet Security Gateway
SNMP
8-1
Chapter 8
SNMP Configuration
This chapter discusses SNMP (Simple Network Management Protocol) for network management
and monitoring.
8.1 About
SNMP
Your ZyWALL supports SNMP agent functionality, which allows a manager station to manage and monitor
the ZyWALL through the network. Keep in mind that SNMP is only available if TCP/IP is configured on
your ZyWALL.
the ZyWALL through the network. Keep in mind that SNMP is only available if TCP/IP is configured on
your ZyWALL.
8.2 Configuring
SNMP
To configure SNMP, enter 22 from the main menu to open Menu 22 - SNMP Configuration, as shown in
the figure below. The “community” for Get, Set and Trap fields is simply SNMP’s terminology for
password.
the figure below. The “community” for Get, Set and Trap fields is simply SNMP’s terminology for
password.
Figure 8-1 Menu 22 — SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: