KYOCERA taskalfa fs-1100 User Manual

3-8

Connecting and Printing

Use Manual Duplex if you require printing on both sides of the paper. 
The even pages are printed first and then reloaded to print the odd 
pages. An instruction sheet is available to assist with loading the sheets 
in the correct orientation and order.

1

Ensure Cassette 1 is selected as the 

Source in the Print Properties 

dialog box.

2

Select 

Print on Both Sides (Manual Duplex).

Select 

Gutter Settings on Layout tab and enter the value required 

for each edge. Gutter width range is 5.00 to 25.4mm (0.20 to 1.00 
inch). Select 

Reduce Image to fit as required.

Select 

Print on both side (manual duplex), and  use the Duplex 

Details option to select Flip on Long Edge for binding on the long 
edge or Flip on Short Edge for binding on the short edge. Select 

Print manual duplex instructions to receive the reloading 
instructions.

3

Select 

OK to return to the Print dialog box and select OK to start 

printing. A Manual Duplex instruction message box displays. The 
even pages are printed including the instruction sheet.

4

Remove all the even pages (including the instruction sheet) from the 
output tray, fan through the sheets to separate them prior to loading.

Ensure 

Print manual duplex instructions is selected to 

receive the instruction sheet. Continue to use the sheet until you 
are familiar with this feature.

Nothing will be printed on the instruction sheet.