Kenwood fleetsync tk-890 User Manual
12
DIM (Dimmer)
Press this key to adjust the brightness of the display and key backlight. Also
press this key to turn the TX and BUSY indicators and the DTMF microphone
keypad backlight ON or OFF.
press this key to turn the TX and BUSY indicators and the DTMF microphone
keypad backlight ON or OFF.
EMG (Emergency Call)
Press this key to initiate an emergency call (requires ANI board). When an
emergency call is made, no tone is emitted and the display does not change.
To end the emergency call, turn the transceiver power OFF.
emergency call is made, no tone is emitted and the display does not change.
To end the emergency call, turn the transceiver power OFF.
HA (Horn Alert)
Press this key to turn the Horn Alert function ON or OFF. If you receive a call
from the base station with 2Tone or DTMF signaling, horn alert will activate.
When you turn Horn Alert ON, a tone will sound and HA (or HORN ALERT)
appears on the display.
from the base station with 2Tone or DTMF signaling, horn alert will activate.
When you turn Horn Alert ON, a tone will sound and HA (or HORN ALERT)
appears on the display.
HC (Home Channel: fixed/ toggle)
Fixed: Press this key to select the pre-programmed Home Channel.
Toggle: Press this key to select the pre-programmed Home Channel. Press
it again to return to the previous channel. If used while scanning, pressing
this key a second time will change to the revert channel.
it again to return to the previous channel. If used while scanning, pressing
this key a second time will change to the revert channel.
IC (Intercom)
This feature requires dual head configuration. Press this key to turn the
intercom feature ON or OFF. While ON, you can press the PTT switch to
communicate to another control head operator without transmitting over the
air. When you press this key, a tone sounds and INTERCOM appears on the
display. The intercom can be used even while scanning and receiving a call.
intercom feature ON or OFF. While ON, you can press the PTT switch to
communicate to another control head operator without transmitting over the
air. When you press this key, a tone sounds and INTERCOM appears on the
display. The intercom can be used even while scanning and receiving a call.
MON (Monitor)
Press this key to cancel QT/DQT and 2-Tone/DTMF signaling squelch. Press
and hold this key for 2 seconds to hear background noise (unmute the audio).
When monitor is being used, the MON icon appears on the display.
and hold this key for 2 seconds to hear background noise (unmute the audio).
When monitor is being used, the MON icon appears on the display.
OPT (Scrambler)
If you have an optional scrambler board installed in your transceiver, you can
press this key to turn it ON or OFF. When enabled, a tone sounds and the
OPT icon appears on the display. To change the scrambler code:
press this key to turn it ON or OFF. When enabled, a tone sounds and the
OPT icon appears on the display. To change the scrambler code:
1 Press and hold the OPT key for 1 second. A tone sounds and CODE
appears on the display with the current code.
2 Press the GRP Up/ Down keys, or use the CH control to select the
desired setting.
3 Press the OPT key. A tone sounds and the display returns to the normal
channel.