Konica Minolta su-1 User Manual
3 Network Scanning
53
3.2.2 Positioning Documents on the Original Glass
1.
Press the
[Scan]
key.
The machine enters Scan mode, and
the scan screen appears.
the scan screen appears.
2.
Lift open the Original Cover, and then
position the document to be scanned
on the Original Glass.
position the document to be scanned
on the Original Glass.
• Position the document with the side
to be scanned facing down.
• Align the document on the scales
above and to the left of the original
glass.
glass.
3.
Press the
[Speed Dial]
key, and then
use the 10-key pad to enter the 3-digit
speed dial number.
speed dial number.
• Specify a speed dial number
between “101” and “110”.
• The FTP server can only be speci-
fied with a speed dial number.
In addition, the speed dial numbers
are programmed with the FTP server
addresses using PageScope Light.
For details, refer to the PageScope
Light for Di152f/Di183f Scanner User Manual.
In addition, the speed dial numbers
are programmed with the FTP server
addresses using PageScope Light.
For details, refer to the PageScope
Light for Di152f/Di183f Scanner User Manual.
• If you wish to change the entered FTP server address, press the
[No]
key, and then enter the correct address.
• If nothing is programmed in the specified speed dial number, an error
message appears. Enter the correct speed dial number.
SU-1-e.book Page 53 Friday, May 24, 2002 10:52 AM