Konica Minolta 7035 User Manual
16
11. Power Saver Modes
You can adjust this Konica system, so that the unit automatically
switches into Auto Low Power mode, and later into Auto Shut
off mode, after specified intervals. Both modes conserve energy
by lowering the fixing temperature resp. switching off certain
internal components. Consequently, there is a certain warm-up
time, when Auto Low Power resp. Auto Shut off mode is
cancelled.
switches into Auto Low Power mode, and later into Auto Shut
off mode, after specified intervals. Both modes conserve energy
by lowering the fixing temperature resp. switching off certain
internal components. Consequently, there is a certain warm-up
time, when Auto Low Power resp. Auto Shut off mode is
cancelled.
1.Select an interval for Auto Low Power and a longer interval for
Auto Shut off. The default setting is 15 minutes for Auto Low
Power and 90 minutes for Auto Shut off.
Power and 90 minutes for Auto Shut off.
2.Press NEXT to access another screen in which Auto Shut off
can be switched ON or OFF. As a default setting, the function
is on. Auto Low Power cannot be deactivated.
is on. Auto Low Power cannot be deactivated.
10. Touch Screen Adjustment
If the touch screen reaction to pressing soft keys appears to be
incorrect or out of focus, the following adjustment should be
performed:
incorrect or out of focus, the following adjustment should be
performed:
1.Call up this function, and follow the instructions on the screen,
as shown on the left.
2.Check if the X/Y coordinates indicated in the message area are
within the limits of the range indicated underneath. If this is
not so, contact the Konica service.
not so, contact the Konica service.
3.You leave the adjustment mode by pressing START.