Konica Minolta 7035 User Manual

Page of 22
17
Function
Explanation
Possible Settings
Auto reset timer
Interval, after which the system returns to the
OFF / 30 / 60 / 90 / 120 /
selected initial settings.
150 / 180 / 210 / 240 /
270 / 300 seconds
AUTO RESET effect
Pressing the AUTO RESET key switches the system to
Full Auto / selected
initial settings
Load RADF effect
Inserting originals into the RADF switches:
the RADF on / RADF and
Auto Reset on
Non Image Area Erase
Dark frames around the originals are not copied.
ON / Only for APS/AMS
RADF Frame Erasure
For originals fed via the RADF, a frame is automatically
None / 1/ 2/ 3/ 4/ 5 mm
erased.
Auto Tray Switch
If paper is used up in one tray, the unit switches to a
OFF / ON
(ATS)
different tray with the same paper size.
(Also needs to be switched on for each tray individually,
see next page)
Platen APS
The corresponding paper size is selected for originals
OFF / ON
positioned on the platen glass.
(Also needs to be switched on for each tray individually,
see next page)
RADF APS
The corresponding paper size is selected for originals
OFF / ON
inserted into the RADF. (Also needs to be switched on
for each tray individually, see next page)
12. Memory Switch
Under this function, various adjustment features are provided,
which will influence the system functionality.
Use the arrows at the bottom to call up screens 2 and 3 and the
arrows on the right to scroll through the feature list. Refer to the
table below, listing all adjustment possibilities (default settings
are underlined).
When you have marked the required feature, press EDIT
repeatedly, until the required setting is displayed. The displayed
selection is active, until it is changed again.
Display 1/3