bk pt3 User Manual

23 

 

 

Your Preamplifier Tuner provides 5 identical sets of inputs - V1, V2, TV, DVD and CD. It is convenient to 

connect components as labeled on the back of your Preamplifier Tuner, but since all the inputs are identical, you 
can connect any compatible source to any set of inputs. For example, you can connect a DAT player to V1 
instead of a VCR. You can program your Preamplifier Tuner to display any 5 character names for any input (see 
SETUP - SOURCE NAMES).  

 

 

The sixth input, TAPE, is primarily intended for analog recorders such as a cassette deck, DAT or Mini 

Disc. If you have a three-head cassette or reel-to-reel tape deck you will prefer the TAPE input since it allows a 
full tape monitor capability. Tape monitor allows you to listen to what is actually on the tape as you are recording 
it. 
 
The Loudness control does not work at high volume settings. Is this normal? 
 
 

Your Preamplifier Tuner’s Loudness control is designed to automatically shape the audio signal for 

increased clarity and intelligibility during LOW VOLUME settings (below -15 dB). The control circuit is designed to 
gradually reduce its effect on the audio signal as the volume is increased. Loudness is completely removed as the 
level approaches 0 dB. 
 
Can I connect a phonograph directly to my Preamplifier Tuner? 

 

 

 No, you will need a separate outboard phono preamplifier. The output of the phone preamp can then be 

connected to any analog input on your Preamplifier Tuner. There are several high-quality outboard phono 
preamps available such as the B&K Phono 10. Talk to the dealer where you purchased your Preamplifier Tuner.