Konica Minolta kn303ev2 User Manual

2-14  Konica Network Interface Card INSTRUCTION MANUAL

This check box for AppleTalk toggles of the network interface card between disabled and enabled.

Check this box to enable AppleTalk.

This is a printer (network interface card) name used on the AppleTalk network. A default name is

KON_(serial number).

Shows a zone in which the network interface card resides. Leave this blank if no zone is created as

when using networks that have no seed routers. Printing will not start unless the zone name is desig-

nated correctly.

Click on [Start Test] to run a printer test. This required a previously entered password. The default

password is [sysadm].

This determines whether or not to output a Status Page (network setup list) when the network inter-

face card has started up. By default, the list is output. After changing this option, you can type a

password and click [Accept Settings], thereby enabling the new setting enabled. You can also print out

the Status Page by clicking Generate Now button after typing the password. The default password is

[sysadm].

When printing the Test Print page or the Status Page, make sure to select the appropriate

printer language for your current environment.

●

The [Printer Setup] page allows you to perform the following functions provided a valid password is entered

beforehand. The default password is [sysadm].

Copier Time-out (sec)

Banner Page

Spooling

Job TimeOut (sec)

Protocol

BaudRate

Parity