Konica Minolta kn303ev2 User Manual
Konica Network Interface Card INSTRUCTION MANUAL 3-3
Chapter 3 Windows 95/98 Configuration (Peer-to-Peer Printing)
●
IP Peer-to-Peer setup
You can set up the IP Peer-to-Peer while installation is in process.
To change the setting, select [Start] --> [Programs] --> [Ip-p2p] --> [IP-P2P] to start up IP Peer-to-Peer.
Setting IP Peer-to-Peer
1.
Once IP Peer-to-Peer begins the [IP-Peer To Peer Setup] dialog box appear to enable you to set
up the [Max Hops for], [IP Port], and [Printer Names] of the printing system.
Max Hops for
IP Peer-to-Peer broadcasts a search for the network interface card on the network.
The default of Max Hops for (0-15) is 2. When the value is set to 0, a search will be exercised only in
the segment in which the computer with an activated IP Peer-to-Peer belongs. When the value is 2, up
to two network routers will be searched everywhere accessible via up to two routers. Note that the
greater the value of Maximum Hop Count, the more traffics generated.
IP Port
Currently you do not need to type anything in this field.
Printer Names
Designate the network interface card name indicated when you selected the printer port during the
printer driver setup. You may use the serial number of the network interface card, IP address, DNS
name, or any unit name as the network interface card name.
To change the currently assigned printer name, restart Windows. Then execute the IP Peer-to-Peer
again to set up the network interface card for printing via IP Peer-to-Peer. The [Printer] dialog box can
be displayed by clicking the [Printer...] button.