Konica Minolta kn303ev2 User Manual
Chapter 6 NetWare Configuration
6-8 Konica Network Interface Card INSTRUCTION MANUAL
■
Setup for NetWare 3.x
Before setting up NetWare, you have to define the print server name, etc., from the MAP (Web utility). See
“Chapter 2 Setting up the Network Interface Card”, for setting up NetWare by MAP. See the manual of
Novell NetWare for setting up with PCONSOLE.
The setup procedure of NetWare 3.x is as follows. To perform this procedure, you must be authorized as
supervisor.
1.
Start up PCONSOLE and select the file server to use.
2.
Generate and assign a print queue.
3.
Define the network interface card as the print server.
4.
Define the notification list/password as necessary.
5.
Set up the primary file server as necessary.
On completion of setup, turn off the main power of the print controller and the main body printer and turn it
on again. The main body printer will print out a Status Page indicating the file servers equipped with print
server and the queues that the file servers will service.
The primary file sever must be defined if the network is of a large scale and connects many
sites having more than one file server. PCONSOLE should be used to set up the primary
file sever.