Konica Minolta kn303ev2 User Manual
Chapter 7 AppleTalk Configuration
7-2 Konica Network Interface Card INSTRUCTION MANUAL
Winlllllllllllllllldows95/lllll
Windows95/98
■
Setup for printing through AppleTalk
This section explains how to configure and use the NIManage (NIManage AppleTalk Administration Pro-
gram) so that printing can be performed from a Macintosh system.
The NIManage is used to perform the following functions:
•
Change the network zone and/or change printer names for the printing system.
•
Assist Konica Customer Support in diagnosing problems.
●
Configuration for AppleTalk
The AppleTalk protocol must be enabled before printing can be performed.
Use the MAP utility and Web Utilities for Windows to check or to enable the AppleTalk protocol.
Refer to “Chapter 2, Setting Up the Network Interface Card” for more details.
•
Print to the printing system by using Chooser to select the network and printer.
•
The network interface card is found in Chooser as KON_(serial number) 1, where 1 stands for the print
controller.
●
Using the NIManage
How to access the NIManage
The NIManage (NIManage AppleTalk Administration Program) is contained on the CD-ROM supplied with
the network interface card.
1.
Copy the NIManage program (folder labeled NIManage) on the CD-ROM to a folder.
For example, place the program in a folder called NIMANAGE or PRINTSERVER.
2.
Double click on the NIManage Program icon when it appears on the desktop. The Zone and
network interface card Device Dialog menu appears.
If your network has no zones, choose only from the network interface card Device field, as no
Zone field is displayed.
3.
Select the Zone that has the network interface card you want to administer.
Available network interface cards on that Zone appear in the network interface card field.
4.
Select the network interface card you want to use.
Setup the network interface card
Use the options added to the menu bar to configure the network interface card. Depending on your printing
system, certain functions may appear grayed out, which indicates that they cannot be selected.
•
Use [Printer Setup] to configure your network interface card for PostScript printers.
•
Use [Reset] to perform a full reset of the network interface card. When you select [Reset] from the
network interface card menu, the network interface card resets automatically.
•
Use [Configuration] to change the network interface card name, and the AppleTalk Zone name; and also
view the network interface card configuration features. You can change the default name of the network
interface card to another one you may prefer. Be sure to recycle the power to the print controller and the
main body printer Off, then On; otherwise, the changes you made will not occur.