Konica Minolta ip011 User Manual

3-14  IP-011 Printer Controller

[8-Up]

[9-Up]

When [Booklet] is selected in the Duplex printing, [2-Up] is automatically selected and you can not

select other settings.

When [Setup] tab-[Print Page Borders] check box is selected, you can print borders between

gathered documents.

Default of Print Page Borders is no check mark.

When Layout is set to [1-Up], you can not select [Print Page Borders].

Click the [Details] tab, then click the [

▼

] button next to the field [Print using the following driver] to

display the list of available print drivers. To use a print driver not listed, click the [New Driver] button.

When a driver is changed, the settings of presently shown property is saved and the property of a

newly selected driver is shown.

Refer to Finisher and DB.

When the Option Tray is attached to the Konica

7020, it is required to set the [Option Tray] in the

[Option] tab. Select either [DB-209] or [DB-409].

Default of the Option Tray is [None].

By setting the Option Tray, functions are limited

or enabled as follows;

When [None] is selected in the Option Tray

settings or when the Option Tray is not

installed, you can not select [Tray 3] and

[Tray 4].

When [DB-409] is selected in the Option Tray settings, you can not select [Tray 4] as a paper tray.

When [DB-209] is selected in the Option Tray settings, you can select all trays as a paper tray.