Konica Minolta pi3505e ps ipscanner ver1 User Manual
Introduction
1
IP Scanner
1-5
1.8
Specifying the IP Address
Be sure to specify the IP address of the copier before using the IP
Scanner.
Scanner.
Specify the IP address from the Basic Settings screen.
Note
After changing the settings, turn the unit off, then on again.
After changing the settings, turn the unit off, then on again.
Parameter
Description
DHCP
Specify whether to automatically retrieve the IP
address from the DHCP server or to specify a
fixed IP address.
address from the DHCP server or to specify a
fixed IP address.
IP Address
Type in the IP address of this unit.
*Type in the IP address only if the “DHCP”
parameter is set to “IP Input”.
*Type in the IP address only if the “DHCP”
parameter is set to “IP Input”.
Subnet Mask
Type in the subnet mask of the connected
network.
*Type in the subnet mask only if the “DHCP”
parameter is set to “IP Input”.
network.
*Type in the subnet mask only if the “DHCP”
parameter is set to “IP Input”.
Gateway
Type in the default gateway address of the
connected network.
*Type in the default gateway address only if the
“DHCP” parameter is set to “IP Input”.
connected network.
*Type in the default gateway address only if the
“DHCP” parameter is set to “IP Input”.