Konica Minolta VIVID 700 User Manual

Chapter

File
Menu

910

File – Import – Digitizer – PC Card (When VIVID 910 is Selected)

Loading the Selected Data ([Load] button)

The [Load] button is used to load the data of the selected file from the memory card to the software.

Operating Procedure

Before starting the following procedure, make sure that the [File-Import-Digitizer-PC Card] dialog box is
displayed.

From the file list, select the name of the

file you want to load.

Click the [Load] button.

A dialog box will appear, allowing you to enter
the desired

element name.

The file name in the memory card will be dis-
played as an element name.

Change the element name if necessary,

and set the parameters.

• Select the desired rate from “1/1”, “1/4”, “1/9”,

“1/16” and “No polygon” by selecting from the
[Reduction Rate] pull-down menu.

• If you want to program to generate points to fill in

holes caused by missing data, set the [File Holes]
setting to “On”.

• Use the [Remove] pull-down menu to select

which points to remove from the imported data.

You can set this to any of the following: “None”,

“Boundary(B.)”, “5deg. & B.”, “10deg. & B.”,
“15deg. & B.”, or “20deg. & B.”

• If you want to filter the imported data, select the

appropriate parameter from the [Filter] pull-down
menu.

Click the [OK] button.

The data of the selected file will be loaded
and displayed in the element view window.
The names of the imported elements will also
appear in the element list, indicating that the
elements have been selected (highlighted).

• The loaded data will be ready to be displayed in

all windows. It will be displayed in the active
window and the windows for which all the ele-
ments are set to be displayed.

• When the data is loaded for the first time after the

software is started, it will be fully framed in all
the windows including those that are hidden.

emo

A clock icon will be displayed during loading.