Fortinet fortianalyzer fortidb-400b User Manual

Visit these links for more information and documentation for your Fortinet product.

Technical Documentation - 

Fortinet Knowledge Center - 

Fortinet Technical Support - 

Training Services - 

Port 1

IP:

____.____.____.____

Netmask:

____.____.____.____

Port 2

IP:

____.____.____.____

Netmask:

____.____.____.____

Port 3

IP:

____.____.____.____

Netmask:

____.____.____.____

Port 4

IP:

____.____.____.____

Netmask:

____.____.____.____

The internal interface IP address and netmask must be valid for the internal network.

Use the following procedure to connect to the web-based manager for the first time. Configu-

ration changes made with the Web Config are effective immediately without resetting the unit 

or interrupting service.

1.  Connect the Port 1 interface of the unit to Ethernet port of the management computer. 

Use a cross-over Ethernet cable to connect the devices directly. Use straight-through 

Ethernet cables to connect the devices through a hub or switch. 

2.  Configure the management computer to be on the same subnet as the Port 1 interface. 

To do this, change the IP address of the management computer to 192.168.1.2 and the 

netmask to 255.255.255.0.

3.  To access the web-based manager, in your browser, go to https://192.168.1.99 (remem-

ber to include the “s” in https://). 

4.  Type 

admin in the Name field, type fortidb1!$ in the Password field, and click Login. 

After connecting to the Web-based manager, you can configure the unit IP address, DNS 

server IP address, and default gateway to connect the unit to the network. 

1.  Go to 

Appliance > Network > Interface.

2.  Click the edit icon to configure each interface.

3.  Set the IP address and netmask for the interface.

4.  Click OK.

1.  Go to 

Appliance > Network > DNS, enter the Primary and Secondary DNS IP address-

es click Apply.

1.  Go to 

Appliance > Network > Static Routing and select Create New.

2.  Set Gateway to the Default Gateway IP address and click OK.

Administrative account 

settings

User name

admin

Password

fortidb1!$

Network Settings 

Default Gateway: 

____.____.____.____

Primary DNS Server:

____.____.____.____

Secondary DNS Server:

____.____.____.____

A default gateway is required for the unit to route connections to the Internet.

Port 1 interface

192.168.1.99

Port 2 interface
Port 3 interface
Port 4 interface

To reset the unit to the factory defaults, in the CLI type the command: 

 

exec reset all-settings

The unit has serial port. Use the null modem cable to connect it to your management com-

puter.

1.  Use a null modem cable to connect the serial port to the management computer serial 

port. 

2.  Start a terminal emulation program (such as HyperTerminal) on the management com-

puter. Use these settings: Baud Rate 9600, Data bits 8, Parity None, Stop bits 1, Flow 

Control None.

3.  At the login prompt, type 

admin for the user name and fortidb1!$ for the password 

and press Enter. 

After connecting to the CLI, you can configure the unit IP address, DNS server IP address, 

and default gateway to connect the unit to the network.

 

1.  Set the IP address and netmask of the Port1 interface. 

config system interface

    edit port1 

         set ip <intf_ip>/<netmask_ip>

         set allowaccess ping https ssh http

     next

     edit port2

     next

     edit port3

     next

     edit port4

     next

end

3.  Configure the primary and secondary DNS server IP addresses.

config system dns

    set primary <dns-server_ip>

    set secondary <dns-server_ip>

end

4.  Configure the default gateway.

config system route

    edit 1

        set device <interface> 

        set dst <destination_ip> 

        set gateway <gateway_ip>

end

Enter the following command at the prompt:

execute shutdown