NuTone QTXEN110S User Manual

Page of 2
SPECIFICATION SHEET
 
REFERENCE 
QTY. 
REMARKS 
Project
  
 
 
Location
  
 
 
Architect
  
 
 
Engineer
  
 
 
Contractor
  
 
 
Submitted by   Date
MODEL QTXEN110S
VENTILATOR
 
21F 
99044990A
A modern-styled, high performance fan, with 
sensing circuitry, that “knows” when to ventilate 
the room.
FEATURES
BLOWER:
•  Plug-in, permanently lubricated motor - engineered
for continuous operation
•  Dynamically balanced centrifugal blower wheel for
quiet, efficient performance
•  Maintains a high percentage of rated CFM in less
than ideal installations
•  Low RPM for quiet operation
HOUSING:
•  Rugged, 26 gauge, galvanized steel construction
•  6” round ducting for superior performance
•  Polymeric duct connector with tapered sleeve and no
metallic clatter
•  7-5/8” height allows for 2” x 8” (nominal) joist
installations
•  Sturdy, easy, four-point mounting directly to joist
•  Includes unique spacer (patent pending) for mounting
to engineered “I” joists
•  Includes hanger bars to position housing anywhere
between 16” to 24”-on-center joists
•  Two sets of mounting holes for hanger bars allow
flush installation with bottom or top of drywall
GRILLE:
•  Integrated humidity sensor
•  Polymeric construction
•  Innovative design - the result of extensive research
with designers and consumers
AUTOMATIC CONTROL:
•  Humidity control automatically turns fan ON when either of
these conditions is detected:
 - a rapid to moderate (user adjustable) increase of humidity
 - humidity above user-adjustable set-point (50%-80% RH)
•  Two wire manual operation for odor control - Turns fan ON
when power line through wall switch is cycled ON, OFF and
back ON
•  Remains ON for a user-adjustable 5 to 60 minutes after
humidity has stabilized and is below set-point or after
manually initiated through power line cycling
•  Saves energy because unit runs only for the time required.
A unit controlled with a wall timer may keep fan ON longer
than required or turn it OFF before room is sufficiently
ventilated
ACCESSORY CONTROL (Purchase separately):
Designed by NuTone for use with this product (purchase
separately)
•  Model P68W (White), 2-Function Wall Control
U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only).
3-Year Warranty
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948