Nortel Networks 5399 User Manual
Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 2
Installing the Model 5399 Remote Access Concentrator Module
2-32
Booting from a Windows NT
®
Host
To boot the Remote Access Concentrator from a Windows NT
®
host, you
must have Remote Annex Server Tools for Windows NT
®
installed.
Remote Annex Server Tools for Windows NT
®
uses the expedited remote
procedure call daemon (erpcd) running on a Windows NT
®
server. Erpcd
responds to all Remote Access Concentrator boot and dump requests.
Refer to the Remote Annex Server Tools for Windows NT
Refer to the Remote Annex Server Tools for Windows NT
®
User Guide
for additional information.
Booting from Another Model 5399 Remote Access
Concentrator
Concentrator
You can boot from another Model 5399 Remote Access Concentrator, if
the Model 5399 Remote Access Concentrator you are trying to boot from
is configured as a boot server. You can do this by using na or admin to
set the annex server_capability to image. See the Remote Annex
Administrator’s Guide for Unix for additional information.
the Model 5399 Remote Access Concentrator you are trying to boot from
is configured as a boot server. You can do this by using na or admin to
set the annex server_capability to image. See the Remote Annex
Administrator’s Guide for Unix for additional information.
Installing the Operational Software and Loading the Image
Use this section if you have successfully connected the Remote Access
Concentrator to your LAN.
Concentrator to your LAN.
This section describes:
•
How to install the Remote Access Concentrator module’s
operational software and image on a device that resides on a
network accessible to the module.
operational software and image on a device that resides on a
network accessible to the module.
•
How to download the operational image from the device to
the Remote Access Concentrator module.
the Remote Access Concentrator module.