Nortel Networks 5399 User Manual
Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 3
ROM Monitor Commands
3-14
config
The config command displays the current configuration information and
revision levels for the Remote Access Concentrator. The config
command displays revision information, the amount of memory installed,
T1 or E1 configuration information, and a description of the number and
type of modems installed. The command syntax is:
revision levels for the Remote Access Concentrator. The config
command displays revision information, the amount of memory installed,
T1 or E1 configuration information, and a description of the number and
type of modems installed. The command syntax is:
config
The config command display for a Remote Access Concentrator with 24
modems (T1) looks similar to this:
modems (T1) looks similar to this:
This display is typical for E1 versions. For T1 and modem-less
versions, the information displayed in some of the fields will be
different than that shown in this example.
versions, the information displayed in some of the fields will be
different than that shown in this example.
REVISION/CONFIGURATION INFORMATION
ROM Software Rev: 1110
Board ID: 64
Board Type: 5399
CPU Type: 486DX2
Ethernet Address: 00-80-2d-xx-xx-xx
Memory size: 8 Meg
EEPROM size: 65504
Flash size: 2 Meg
Flash ID: 0089
WAN 1: PRI E1 ETSI
Revision: VERSION A MGR=1.159
WAN 2: PRI E1 ETSI
Revision: VERSION A MGR=1.159
SLC 1
SLC SRAM Size: 128 K
Modem Count: 31
Modem Rev: 0
SLC 2
SLC SRAM Size: 128 K
Modem Count: 31
Modem Rev: 0
Hub Slot
Hub CMB HW Rev
Hub EE Rev
Hub EE Seg Sel
Hub Jmpr Seg Sel
10
01
0.0
N/A
00