Nortel Networks 5399 User Manual
3-17
Chapter 3
ROM Monitor Commands
Nortel Networks 5399 Access Switch Hardware Installation Guide
image
The image command sets and displays the name of the image file
containing the Remote Access Concentrator’s software. The syntax is:
containing the Remote Access Concentrator’s software. The syntax is:
image [–d | filename]
The filename argument permits up to 100 characters. To return the image
name to its default, enter a pair of double-quote characters (""). The
default image name is oper.64.enet. The image command display looks
like this:
name to its default, enter a pair of double-quote characters (""). The
default image name is oper.64.enet. The image command display looks
like this:
The image –d command display looks like this:
monitor:: image
Enter Image name: [(ip)"oper.64.enet", \
(mop) "OPER_64_ENET.SYS"]::
Enter TFTP Load Directory [""]::
Enter TFTP Dump path/filename ["dump.192.9.200.88"]::
Enter TFTP Dump path/filename ["dump.192.9.200.88"]::
monitor:: image –d
Image name:Default (ip): "oper.64.enet"
Default (mop):"OPER_64_ENET.SYS"
TFTP Load Directory: ""
TFTP Dump path/filename: "dump.192.9.200.88"
SELF image name: "oper.64.enet"
TFTP Dump path/filename: "dump.192.9.200.88"
SELF image name: "oper.64.enet"
The SELF image name appears only if the self-boot image is
loaded.
loaded.