Navman la000578a User Manual
12
LA000578A © 2006 Navman New Zealand. All rights reserved. Proprietary information and specifications subject to change without notice.
In addition to the configurable jumpers, there is a selection of test points on the board. The
signals available on the test points are shown in Table 3-5.
Test point
Function
E1
TXA
E2
RXA
E3
TXB
E4
RXB
E6
1PPS
E7
not used
E8
ground
E9
ground
Table 3-5 Signals available on the test points
There are some settings that should not be changed when using the standard Jupiter 30 module
in conjunction with the development unit. These are as follows:
• SW2 must remain selected on 3.3 VDC
• Link for JB3/4 must be fitted
• Link for JB16/17 must be fitted
• Link for JB3/4 must be fitted
• Link for JB16/17 must be fitted
• SW3 DIP switch must be all off except SW3.3