Nortel Networks 2212 User Manual

Chapter 6 WLAN Handset, headset, batteries, chargers, and accessories

NN40050-101

NN40050-101

Quad chargers are not interchangeable. Use only the charger made for your handset.

Quad chargers are available for the WLAN Handset 2211 and WLAN Handset 2212. 

The Quad Charger comes with the appropriate power supply for the site. Place the Quad Charger 
on a flat, horizontal surface. Plug the power supply into the Quad Charger and into an appropriate 
wall outlet.

Remove the battery pack from the handset, following the steps in 

.

Insert the battery pack into one of the four charging bays. 

The LED above the charging bay turns on. If the LED starts blinking as soon as the battery 
pack is inserted, remove the battery pack and reinsert it into the charger. 

If the LED continuously blinks during the charging process, the battery pack is unusable. 
Properly dispose of the unusable battery pack.

When charging is complete, the LED turns off. Remove the battery pack from the charger.

Clean the Desktop, Dual or Quad Charger by wiping the surface with a clean, water-dampened 
cloth or paper towel. A mild detergent solution can be used. Be sure to wipe away any detergent 
residue with a plain water-dampened cloth. 

Do not place anything in the Quad Charger other than the correct WLAN 
Handset. You might damage the contacts. Bent contacts can keep the battery 
packs from charging.

Unplug the charger before attempting to clean it.

Do not immerse the charger in water or other liquid. 

Do not pour liquids into the charger slot.