Navman tracker 5500 User Manual
13
TRACKER 5100/5100i/5500/5500i Installation and Operation Manual
NAVMAN
3-1-2 Latitude and longitude
Latitude and longitude can be displayed at the top of
the chart. Normally the position is the boat’s position,
and the latitude has a boat symbol to show this:
the chart. Normally the position is the boat’s position,
and the latitude has a boat symbol to show this:
If the cursor has been moved in the last ten seconds,
then the position is the cursor’s position, and the
latitude has a cursor symbol to show this:
then the position is the cursor’s position, and the
latitude has a cursor symbol to show this:
Warning: When reading the boat position,
make sure the position is not the cursor position.
3-1-3 Chart scale
Press
to zoom in and display a smaller area of
the chart in more detail. Press to zoom out and
display a bigger area in less detail.
display a bigger area in less detail.
The chart scale can be displayed (e.g. scale = 8 nm,
see below). The scale is the vertical distance across
the currently visible chart area. For example if the
scale is 8 nm then a portion of chart eight nautical
miles high is currently displayed.
see below). The scale is the vertical distance across
the currently visible chart area. For example if the
scale is 8 nm then a portion of chart eight nautical
miles high is currently displayed.
3-1-4 The compass
A compass can be displayed at the top of the chart
(see section 3-1-8).
(see section 3-1-8).
When the boat is navigating to a point, the compass
shows the bearing to the destination (BRG) in the
middle and the boat’s course over ground (COG),
for example here BRG is 4° and COG is 12°:
shows the bearing to the destination (BRG) in the
middle and the boat’s course over ground (COG),
for example here BRG is 4° and COG is 12°:
Otherwise the compass shows the boat’s COG in
the middle, for example here COG is 12°:
the middle, for example here COG is 12°:
3-1-5 Chart symbols
The chart will show symbols, such as waypoints and
chart symbols. When the cursor is placed over a
symbol for at least two seconds, a data window
appears at the bottom left of the display with
information about the symbol.
chart symbols. When the cursor is placed over a
symbol for at least two seconds, a data window
appears at the bottom left of the display with
information about the symbol.
3-1-6 Chart information
To see stored data about a point on the chart (for
example, a chart symbol):
example, a chart symbol):
1
Move the cursor to that point on the chart.
2
Press MENU and select Chart info.
3
A menu of objects is displayed:
i
i
Select an object to display.
ii
Press ESC to return to the menu. Select
other objects.
other objects.
iii Finally, press ESC to return to the chart.
3-1-7 Find nearby services
To find and display nearby services:
1
To see services near the boat’s position, press
ESC to switch to centre on boat mode. To see
services near a different point, move the cursor
to that point on the chart.
ESC to switch to centre on boat mode. To see
services near a different point, move the cursor
to that point on the chart.
2
Press MENU and select Find.
3
Select the type of service. There are three
types of service:
Ports
types of service:
Ports
A list of ports is displayed. Select the port
to display.
To search for a port:
i
to display.
To search for a port:
i
Press MENU and select Find.
ii
Enter some or all of the letters of the
port name. Press ENT.
port name. Press ENT.
Port services
i
Select the type of service to find.
ii
A list of places with this service are
displayed. Select the place to display.
displayed. Select the place to display.
Tide stations
A list of tide stations is displayed. Select
the station to display. The chart redraws
with the tide station centred. To now
display a tide chart (see section 8) for the
station:
i
the station to display. The chart redraws
with the tide station centred. To now
display a tide chart (see section 8) for the
station:
i
Press MENU and select Chart info.
ii
Select Tide height.
3-1-8 Change the data display and
compass display
compass display
Numeric data and a compass can be displayed at
the top of the chart display. To change these:
1
the top of the chart display. To change these:
1
Press MENU and select Data header.
2
To turn the data display off or on:
i
i
Select Data.
ii
Select Off or On.
3
To choose the size of the numbers:
i
i
Select Size.
ii
Select:
Small: displays three fields per line and
up to four lines.
Large: displays two fields per line and
up to four lines.
up to four lines.
Large: displays two fields per line and
up to four lines.
BRG (red)
COG
COG
Minutes, to 3 decimal places
(about 2 m (6 ft) resolution)
(about 2 m (6 ft) resolution)
Degrees
36° 29.637
'
S
175° 09.165
'
E
Latitude
Longitude
+
36° 29.684
'
S
175° 09.201
'
E