Navman tracker 5500 User Manual

9

TRACKER 5100/5100i/5500/5500i Installation and Operation Manual

NAVMAN

If the TRACKER is wired for auto power (see section
15-3), then the TRACKER automatically turns on and
off with the boat power, and can not be turned on or
off manually.

If the TRACKER is not wired for auto power, turn the
unit on by pressing 

.

After the TRACKER has been turned on:

1

The unit displays a title display for a few
seconds, then beeps again and displays a
navigation warning.

2

If necessary, adjust the display to be easy to
read (see section 2-3).

Read the warning and press ENT.

3

The satellite display is shown.

Either wait for the GPS receiver to start up
and the status to change from ‘acquiring’ to
‘GPS fix’ (see section 7).

Or press ESC.

4

The TRACKER chart is displayed (see section 3).

If the TRACKER is not wired for auto power, turn the
unit off by holding down 

 until the display turns off.

After you have turned the TRACKER on, it shows
the satellite display until the GPS receiver gets a GPS
fix, then displays the Chart. The Chart is the display
that you will normally use for navigation.

Fuel (fuel computer)

   Section 4

Waypoints

   Section 9

Tides (tide chart)

   Section 8

Satellite (GPS data)

   Section 7

Highway (boat path)

   Section 6

Data (numeric data)

   Section 5

User card

   Section 11

Routes

   Section 10

About

   Section 12

The main displays

    See:

Display menu

Chart

Fuel

Data

Highway

Satellite

Tides

Waypoints

Routes

User C-card

About

Press ESC to
return to
chart display

To use one of the other main displays, press DISP
for the display menu and select a display to use.

To return to the chart display, press ESC.

Press DISP for
display menu

To select a display:

i press 

 or 

 to

highlight the display

ii press ENT to go to

the display

Chart (navigation)

   Section 3