Konica Minolta ip421ev211 User Manual

Print Controller INSTRUCTION MANUAL  3-13

Select [Spool data format] either from EMF or RAW.

When [Print directly to the printer] is selected, a print job is sent directly to the printer without

spooling it.

Click [Detail] tab-[Port Settings] button to perform settings of the port selected on the [Print to

the following port] box.

When the “LPT” is selected, the [Configure LPT Port] dialog is shown by clicking the [Port

Settings] button. The following settings are performed on the [Configure LPT Port] dialog.

When [Spool MS-DOS Print Job] is selected, a MS-DOS print job is spooled.

When [Check port state before printing] is selected, the port status is checked before

printing.

By using the [Sharing] tab, you can share a printer. Refer to your Windows manual for printer

sharing.

Click the [

▲] or [▼] button or directly enter the number of copies from the keyboard.

Default is 1.

This function is used to specify how to output multiple pages.

Default is ON. It is recommended that you select [Collate] ON on the [Paper] tab rather than

select it for each application.

collate on  

collate off