Konica Minolta ip421ev211 User Manual

3-16  Print Controller INSTRUCTION MANUAL

To select offset click [Features - Offset] from the list shown by using the [

▼] button.

Default is [Off].

To select the Staple position click [Features - Staple] from the list shown by using the [

▼]

button.

The settings you can select are as follows:

 [None], [Single-Left], [Double Top], [Double Left].

Default is [None].

However, staple setting cannot be made in the following cases:

•  [Finisher] is not selected.

• OHP (Transparency), OHP-Interleave (Blank) or OHP-Interleave (Print) are selected

as the Media Type.

• Such a combination of settings as follows is made:

(Example: Double Left for A3-size paper (portrait)

For details on how to position the Staple, refer to the Instruction Manual of the copier.

Stapling is performed as shown for the following orientations:

2-point stapling not available with papers of B5 size and under.

Single Left (portrait)

Double Top (portrait)

Double Left (portrait)

Single Left (Landscape) Double Top (Landscape)

Double Left (Landscape)

Unavailable with B5-size paper