Konica Minolta ip421ev211 User Manual
Chapter 4 Control Panel Setup
4-12 Print Controller INSTRUCTION MANUAL
● On the control panel:
8.
Press the [PRINTER/SCANNER] button to display the printer mode basic screen.
Printer Mode Basic screen will appear.
9.
Press the [SETTING] key to get the Printer Menu screen to appear, and then press
numeric key [5] to select [5. Password Print] and press the [OK] key.
Password Print screen will appear.
10. Enter a user ID using the numeric keys and press the [OK] key.
Password Input screen will appear.
11. Enter a password using the numeric, upper or lower case keys, and touch the [OK]
key.
A list showing relevant print jobs will appear. Or, if there is no relevant job, a corresponding message
will appear. If this is the case, press the [CANCEL] key to quit Password Print.
12. From the list, select the desired print job, and touch the [PRINT] key.
The printing process will start.
Deleting Password Print Jobs
You can delete print jobs once set for Password Print.
To do this, in the window appearing in step 12 under the heading of “Password Print Proce-
dures”, select the print job you want to delete, and touch the [DELETE] key in the window.
Print jobs of Password Print are saved to the print controller’s hard disk. The saved data
is automatically deleted 24 hours later.
● Format HD
If you select [6. Format HD] on the Printer Menu Screen, a format confirmation screen will
appear. For details, refer to “Hard Disk-related Troubles” under the heading of Troubleshooting
in Appendix A.