Konica Minolta ip421ev211 User Manual
Chapter 5 Scanner
Print Controller INSTRUCTION MANUAL 5-5
When using the system as a scanner, it is recommended that box numbers be previ-
ously assigned and made known to individual users via e-mail or other means.
The box number assists in protecting the individual users’ data.
5.
If the message [Position original in the RADF face-up] appears on the LCD display,
set elements such as Text/Photo Enhancement, SCAN DENSITY, SCAN MODE, Qual-
ity, SIZE, Application Functions, etc. as required, and then scan the document as
follows:
6.
Press the [SCAN] key on the LCD display. The document placed on the platen glass
or RADF will be scanned with the current settings.
As the document is scanned, the scanned data is temporarily held in the copier's E-RDH memory. It
is not yet stored on the controller's hard disk. When the document is scanned through and you have
another document to scan, simply set it in place as you did for the previous one, and press the
[SCAN] key again.
Pressing the START button allows you to upload the scanned data to the controller's hard disk.
Additional documents you scan by pressing the [SCAN] key are handled together with the
first document as a series of documents (namely, they are stored as one file.).
You can press the START button instead of the [SCAN] key to let the loaded document be directly
uploaded to (stored on) the hard disk as a TIFF file when the scanning process is over.
The image direction you will have in your reading application depends on the original document
direction.
Original size restrictions and procedures for loading originals are the same as in the
copy mode. For more on this, refer to your copier’s INSTRUCTION MANUAL.