Funai drv-b2734 User Manual
16
Get
tin
g S
tar
ted
ted
EN
Connections
Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.
capabilities of your existing equipment.
Before installation, plug off your TV and this unit.
Using the Scart jack
Using the Scart jack
1
Connect the antenna or cable to the
AERIAL jack of this unit.
AERIAL jack of this unit.
2
Connect the RF OUT jack of this unit
to the Aerial jack of your TV. Use the
supplied RF cable.
to the Aerial jack of your TV. Use the
supplied RF cable.
3
Connect AV1 (TV) Scart jack of this
unit to the Scart jack of your TV. Use
the supplied Scart cable.
unit to the Scart jack of your TV. Use
the supplied Scart cable.
Note
• If your TV does not have a Scart jack, use commercially
available Scart adaptor or Scart/RCA cable to connect.
Use only AV1 (TV) or AV2 (DECODER) jack for the
VCR output signals of this unit.
Use only AV1 (TV) or AV2 (DECODER) jack for the
VCR output signals of this unit.
Using the S-VIDEO OUT jack and the AUDIO
OUT jack (only for DVD)
OUT jack (only for DVD)
If your TV has an S-Video input jack, use S-Video and
Audio cables to connect.
Audio cables to connect.
1
Follow steps 1 and 2 above.
2
Connect S-VIDEO OUT jack of this unit
to the S-Video input jack of your TV. Use
commercially available S-Video cable.
to the S-Video input jack of your TV. Use
commercially available S-Video cable.
3
Connect the AUDIO OUT jacks of this
unit to the Analogue audio input
jacks of your TV. Use a commercially
available Audio cable.
unit to the Analogue audio input
jacks of your TV. Use a commercially
available Audio cable.
Connecting to external equipment
This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
Recording from a DVD player, VCR or other Audio-
Video equipment with a Scart output jack (AV2)
Getting Started
DVD/VCR
AV2(DECODER)
AUDIO
OUT
AERIAL
RF OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
DVD/VCR
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
2
3
3
1
Cable
Signal
Signal
Antenna
RF cable
(not supplied)
(not supplied)
RF cable
(supplied)
(supplied)
Scart cable (supplied)
or
Scart/RCA
cable (not
supplied)
cable (not
supplied)
To Aerial jack
Audio/Video cable (not supplied)
Scart adaptor
(not supplied)
(not supplied)
*
The unit is for the DRV-B2737.
Note for a TV with no S-Video input jacks or
Scart jack:
• This unit has no RF modulator, so this type of TV
Scart jack:
• This unit has no RF modulator, so this type of TV
cannot be used.
DVD/VCR
AV2(DECODER)
AUDIO
OUT
AERIAL
RF OUT
L
R
S-VIDEO
OUT
AV1(TV)
DVD
DVD/VCR
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
AUDIO IN
S-VIDEO IN
*
The unit is for the DRV-B2737.
DRV_B2737_B2734.book Page 16 Thursday, March 31, 2005 10:04 PM