Funai drv-b2734 User Manual

30

EN

To check the timer programming in process
Press [TIMER PROG.].

• If a timer recording is proceeding, that programme is 

highlighted in red. In such a case, you cannot select 
any other programmes.

• When you check the timer programming in progress 

by pressing [TIMER PROG.] during operations of 
the component (DVD or VCR) which is not currently 
used for the timer recording, the programme will not 
be highlighted. In this case, you cannot select other 
programmings.

S] to stop the disc recording or 

SO] to stop the tape 

• [STOP 

S] on the remote control is not effective.

The error number appears on the timer programming 
list. 

The error programme will be displayed in grey with 
an asterisk and have an error number.

E1–E22, E37–E39: Recording error
E23-E24: Unrecordable disc
E25:•Copy prohibited programme

        •Cannot record because of the NTSC / PAL-

60 signal is received.

E26–E28: Copy prohibited programme
E29: Disc protected
E30: Disc full
E31: Already recorded 99 titles (Video mode)
E32: Already recorded 99 titles (VR mode)
E33: Already recorded 999 chapters
E34: No space for Control Information
E35: PCA (Power Calibration Area) full
E36: Already finalised Video format disc
E40:•There are some unrecorded parts due the 

overlapped timer programmes.

        •Recording did not start at the start time.
        •There is no tape in the cassette 

compartment.

        •Tape recording reaches to the tape end 

during timer recording.

E41: Power failure
E42: No disc
The error programme will be deleted once you 
check the error in the programme list, or once you 
cancel the timer-standby mode and re-enter it.

The Programme Delivery Control (PDC) assures that 
the TV programmes you have programmed for timer 
recording are recorded exactly from beginning to end, 
even if the actual broadcasting time differs from the 
scheduled time due to a delayed start or extension of 
the programme duration. Furthermore, if a 
programme is interrupted, the recording will also be 
interrupted automatically and resumed when the 
programme starts again.

If the PDC signal drops out because the broadcast 
signal is weak, or if a broadcasting station does not 
transmit a regular PDC signal, the timer recording is 
performed in normal mode (without PDC) even if it 
was programmed for PDC. If the starting time of the 
PDC timer recording is between 0:00 and 3:59 on a 
given day, the PDC function will operate from 20:00 
on the previous day to 4:00 on the given day. If the 
starting time of the PDC timer recording is between 
4:00 and 23:59 on a given day, the PDC function will 
operate from 0:00 on the day to 4:00 on the given day. 
This means that if the relevant programme is 
broadcasted within this period, it is recorded correctly. 
If the timer is not programmed correctly, the incorrect 
timer setting stays in effect unless you cancel it. To 
cancel an incorrect timer setting, refer to “Checking, 
cancelling, or correcting the timer programming 
information” on page 29.

• If there is a power failure or the unit is unplugged for 

more than 30 seconds, the clock setting and all 
timer settings will be lost.

• If there is no disc or an unrecordable disc in the tray, 

the DVD indicator will flash and timer recording will 
not occur. Insert a recordable disc.

• If there is no tape or a tape with a record tab is not in 

the cassette compartment, the VCR indicator on the 
front panel flashes and timer recording cannot be 
performed. Please insert a recordable tape.

• When all timer recordings are complete, the 

  

icon flashes. To play back or eject the recorded disc, 
press [T-SET], and then press [PLAY 

P] or 

[OPEN / CLOSE / EJECT 

O].

DRV_B2737_B2734.book  Page 30  Thursday, March 31, 2005  10:04 PM