Funai drv-b2734 User Manual

65

EN

To cue or review picture during playback (Picture 
Search):
Press [FWD 

f] or [REW r] during playback.

Press it again and the unit will search in super high 
speed.

To freeze the picture on TV screen during 
playback (Still mode):
Press [PAUSE 

p]. Each time you press the button, 

the picture will be forwarded frame by frame.
If the picture begins to vibrate vertically during the still 
mode, stabilize the picture by pressing the 
[PROG. 

U / D].

If the picture is distorted or rolling vertically, adjust the 
vertical hold control on your TV, if equipped.

Counter Reset:
Press [CLEAR].

To play back in slow motion:
Press [SLOW] during playback or the still mode.
If the noise bars appear on the TV screen, you can 
reduce it by pressing [PROG. 

U / D].

• Still / Slow / Pause mode will be automatically 

cancelled after 5 minutes to prevent damage to the 
tape and the video head.

• To return to play back from the Picture Search / Still / 

Slow mode, press [PLAY 

P].

This unit will record and playback Hi-Fi stereo sound. 
This unit will receive stereo and bilingual broadcasts 
and it is possible to record in several ways and to play 
back the sound.

Selecting the Sound Mode
You can select each mode by pressing [AUDIO] on 
the remote control. Each mode is indicated on the TV 
screen as following.

• During reception of bilingual broadcasts

• If you play back non-Hi-Fi tapes, the unit will play 

back automatically in monaural even if you select 
any mode.

• If the stereo signal becomes weak, the broadcast is 

automatically recorded in monaural.

Main

Main audio from the both 
speakers

Main

Sub

Sub audio from the both 
speakers

Sub

Main / 

Sub

• Main audio from the left 

speaker

• Sub audio from the right 

speaker

Main

Sub

DRV_B2737_B2734.book  Page 65  Thursday, March 31, 2005  10:04 PM