bk avr317 User Manual

 

55

Use the Z (zone) function via the remote control - For use in a second audio zone, your receiver comes 
equipped with a fully independent 2-channel analog pre-amp. The easiest way to control this second zone is with 
a dedicated Zone 2 (the factory default zone ID setting of Zone B is 2) remote available from B&K and other 
universal remote suppliers. However, you may also control your unit’s second zone from the Zone 1 remote via its 
“Z” button. 

 

 

From Remote 

From Front Panel 

Action 

1 

B&K 

make sure remote is in B&K mode 

2 

Z 

select alternate zone control 

3 

2 

select desired zone 

 
Normally, your second zones’ zone ID will be set to 2. However, because it is possible to change the zone ID, 
(see Advanced settings) enter the current Zone B zone ID here to get control of the second zone. If the zone ID is 
10 or larger hit +10 followed by the second digit to gain control.  
 
After a few seconds of inactivity, control will automatically revert to Zone 1. If you don’t wish to wait, just press Z 
then 1. You may also control Zone 2 from a remote control or front panel via the menu system. See Zone 2 
operation 
 

 

Presets allow you to save your favorite settings and recall them instantly. Your receiver can store two banks of 40 
presets (0...39) in each of 2 Zones. The saved information includes the selected audio source, selected video 
source, volume, the audio mode and number of speakers, the tuner station and band settings, and all of the 
temporary settings and overrides described previously. A convenient set of 10 presets come preprogrammed with 
your receiver.  
 
Recalling a Preset 

 

 

From Remote 

From Front Panel 

Action 

1 

number or +10+ number 

(PRESET) step favorite preset 

review settings for recall 

2 

SEL or ENTER 

(ENTER) 

recall preset 

CONTROL ZONE 2

 

 2 DVD   - 25 DB