Chauvet intimidator 200 User Manual
Page 4 of 22
Intimidator™ Scan LED 200 User Manual (Rev. 02a)
Product at a Glance
Use on Dimmer
x
Auto Programs
P
Outdoor Use
x
Auto-ranging Power Supply
P
Sound Activated
P
Replaceable Fuse
P
DMX
P
User Serviceable
x
Master/Slave
P
Duty Cycle
x
Safety Notes
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
information about the installation, usage, and maintenance of this product.
· Keep this User Manual for future consultation. If you sell this product to another
user, be sure that they also receive this document.
· Always make sure that the voltage of the outlet to which you are connecting this
product is within the range stated on the decal or rear panel of the fixture.
· This product is for indoor use only! To prevent risk of fire or shock, do not expose
this fixture to rain or moisture.
· Make sure there are no flammable materials close to the unit while operating.
· Always install this product in a location with adequate ventilation, at least 20 in (50
· Always install this product in a location with adequate ventilation, at least 20 in (50
cm) from adjacent surfaces.
· Be sure that no ventilation slots on the unit’s housing are blocked.
· Always disconnect this product from the power source before cleaning it or
· Always disconnect this product from the power source before cleaning it or
replacing the fuse.
· Make sure to replace the fuse with another of the same type and rating.
· If mounting this product overhead, always secure it to a fastening device using a
· If mounting this product overhead, always secure it to a fastening device using a
safety cable.
· The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this
product at higher temperatures.
· In the event of a serious operating problem, stop using the unit immediately.
· Never try to repair this product. Repairs carried out by unskilled people can lead
· Never try to repair this product. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical
assistance center.
assistance center.
· Never connect this product to a dimmer pack.
· Make sure the power cord is not crimped or damaged.
· Never disconnect the power cord by pulling or tugging on the cord.
· Never carry a fixture from the power cord or any moving part. Always use the
· Make sure the power cord is not crimped or damaged.
· Never disconnect the power cord by pulling or tugging on the cord.
· Never carry a fixture from the power cord or any moving part. Always use the
mounting bracket or the handles.
· Always avoid direct eye exposure to the light source when this fixture is on.