Crestron cnxfz User Manual
Focus/Zoom Control Interface
Crestron CNXFZ
Most lens types operate in rate mode. If position feedback is provided then
focus/zoom presets can be recalled. Without feedback, lens presets cannot be
achieved in rate mode. Some lenses can switch between rate and position mode; the
CNXFZ provides the appropriate connections to facilitate this. This type of lens can
achieve presets without feedback.
focus/zoom presets can be recalled. Without feedback, lens presets cannot be
achieved in rate mode. Some lenses can switch between rate and position mode; the
CNXFZ provides the appropriate connections to facilitate this. This type of lens can
achieve presets without feedback.
Problem Solving
Troubleshooting
The table below provides corrective action for possible trouble situations. If further
assistance is required, please contact a Crestron technical support representative.
assistance is required, please contact a Crestron technical support representative.
CNXFZ Toubleshooting
TROUBLE
POSSIBLE CAUSE(S)
CORRECTIVE ACTION
CNXFZ does not
function. POWER
LED is not
illuminated.
function. POWER
LED is not
illuminated.
CNXFZ is not receiving
network power.
network power.
Confirm power is supplied to
the unit.
the unit.
CNXFZ does not
function. NET LED is
not illuminated.
function. NET LED is
not illuminated.
CNXFZ is not communicating
with the network.
with the network.
Verify network connection on
interface box. Poll network in
Performance Viewport.
interface box. Poll network in
Performance Viewport.
CNXFZ is not
Loose or broken wiring.
Verify cable ends and wiring.
responding.
CNXFZ ID is not set to match
the NET ID.
the NET ID.
Poll network in Performance
Viewport. Verify that the
CNXFZ NET ID is properly set
to match the SIMPL program.
Viewport. Verify that the
CNXFZ NET ID is properly set
to match the SIMPL program.
CNXFZ ID is not unique; two
or more units share the same
ID.
or more units share the same
ID.
Poll network in Performance
Viewport. Verify that each ID is
used once.
Viewport. Verify that each ID is
used once.
ID setting changed after
CNXFZ powered up.
CNXFZ powered up.
Power down CNXFZ. Power
up to reset ID.
up to reset ID.
Further Inquiries
If after reviewing this Operations Guide for the CNXFZ, you cannot locate specific
information or have questions, please take advantage of Crestron's award winning
technical support team by calling:
information or have questions, please take advantage of Crestron's award winning
technical support team by calling:
• In the US and Canada, call Crestron’s corporate headquarters at
1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400.
• In Europe, call Crestron International at +32-15-50-99-50.
• In Asia, call Crestron Asia at +852-2341-2016.
• In Latin America, call Crestron Latin America at +5255-5093-2160.
• In Australia, call Crestron Pacific at +613-9480-2999.
• In Asia, call Crestron Asia at +852-2341-2016.
• In Latin America, call Crestron Latin America at +5255-5093-2160.
• In Australia, call Crestron Pacific at +613-9480-2999.
For local support from exclusive Crestron factory-trained personnel in New Zealand
call Amber Technologies at +649-410-8382.
call Amber Technologies at +649-410-8382.
16
• CNX Focus/Zoom Control Interface: CNXFZ
Operations Guide - DOC. 5753