Belkin f5d7000ce2 User Manual

Report No.: RM920221R04A

9

Issued: Mar. 14, 2003

Reference No.: RM920221R04

4.1.3 TEST PROCEDURES

 

a.  The EUT was placed 0.4 meters from the conducting wall of the shielded room

with EUT being connected to the power mains through a line impedance
stabilization network (LISN). Other support units were connected to the power
mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling
impedance for the measuring instrument.

 

b.  Both lines of the power mains connected to the EUT were checked for maximum

conducted interference.

 

c.  The frequency range from 150 kHz to 30 MHz was searched. Emission levels

over 10dB under the prescribed limits could not be reported

4.1.4  DEVIATION FROM TEST STANDARD

No deviation