Furuno gp37 User Manual
9. INSTALLATION
57
Output setting
1. Press the [MENU] key once or twice to
open the menu.
2. Choose I/O SETUP.
3. Press the [ENT] key.
3. Press the [ENT] key.
I/O SETUP
DATA1
:
NMEA-REM1
DATA2
: NMEA-REM
NMEA VER : VER2.0
SAVE WPT/RTE
SAVE WPT/RTE
→
PC?
LOAD WPT/RTE
←
PC?
LOAD WPT
←
YEOMAN?
WIRING INFO?
I/O SETUP menu
4. Choose DATA1, DATA2 or NMEA VER as
appropriate.
5. Press the [ENT] key. One of the following
screens appears depending on the item
selected at step 4.
selected at step 4.
NMEA-REM1
NMEA-REM2
NMEA-AP
NMEA-REM2
NMEA-AP
For DATA1
NMEA-REM
NMEA-AP
RTCM-OUT*
NMEA-AP
RTCM-OUT*
For DATA2
VER 1.5
VER 2.0
VER 2.1
VER 2.0
VER 2.1
For NMEA
Version
Version
*= For GP-37, fixed at "BEACON" when MODE
on DGPS/WAAS menu is set to EXT BEACON.
DATA1, DATA 2 and NMEA version options
6. Use
▲ or ▼ to choose desired option.
NMEA-REM1, 2: Output data to radar,
echo sounder, etc.
echo sounder, etc.
NMEA-AP: Output data to an autopilot.
RTCM-OUT: Choose when equipped with
internal DGPS beacon receiver (GP-37).
internal DGPS beacon receiver (GP-37).
VER 1.5, 2.0, 2.1: Choose the NMEA
version of external equipment. If you are
unsure of the version number, try both
and choose the one which successfully
outputs data.
version of external equipment. If you are
unsure of the version number, try both
and choose the one which successfully
outputs data.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
8. Press the [MENU] key twice to finish.