Crestron c2n-iif ad User Manual
Crestron C2N-IIF Intercom
Interface
Intercom Interface: C2N-IIF
Purpose
The purpose of this addendum is to provide additional information not supplied with
the original C2N-IIF Operations & Installation Guide (Doc. 6235). Specifically, this
addendum provides additional information with regard to:
the original C2N-IIF Operations & Installation Guide (Doc. 6235). Specifically, this
addendum provides additional information with regard to:
• The SIMPL Windows device symbol that appears on page 28.
• Signal definitions that appear on pages 29 through 31.
• Signal definitions that appear on pages 29 through 31.
Revised SIMPL Windows Device Symbol
Due to changes in the C2N-IIF firmware (version 1.35 or later), the SIMPL
Windows device symbol has been changed. Since muting can be accomplished by
using other signals in the device symbol, the MuteAudio digital input signal has
been removed to simplify programming. Instructions for programming a Mute
function are now provided in the revised signal definitions found on page 3 of this
document.
Windows device symbol has been changed. Since muting can be accomplished by
using other signals in the device symbol, the MuteAudio digital input signal has
been removed to simplify programming. Instructions for programming a Mute
function are now provided in the revised signal definitions found on page 3 of this
document.
The following diagram shows the new device symbol.
Addendum #1 for DOC. 6235
Intercom Interface: C2N-IIF
• 1