Fujitsu C120-E361-04EN User Manual

1-10

C120-E361-04EN

CHAPTER 1  RCI Build Procedure 

7

Execute the setrci -c addconfig command on main unit B to expand the RCI 

configuration.

8

Display the RCI status  by executing the  setrci -c statcommand on main unit A.

9

Verify that the added main unit is incorporated.

According to the following procedure, connect different units with RCI cables by 

using a daisy-chain connection.

1

Prepare RCI branching connectors and RCI terminating resistors.

All of them are supplied with the main unit.

2

Connect the main unit and I/O units with RCI cables (see 

1

Connect the RCI branching connector (1) to the RCIport on an XSCF unit of the 
main unit.

2

Connect the RCI branching connector and the RCI port of an I/O unit with an RCI 

cable (2) by using a daisy-chain connection.

XSCF> setrci -c set 2

The command completed successfully

XSCF> setrci -c addconfig 

The command completed successfully

XSCF> setrci -c stat

HOST

 address 000102ff

 Active

LIST

 address    pwr  alm   I/F    sys-phase   ctgry  dev-cls sub-cls tm-out

 000101ff  OFF   -    ACT     --            host    0001    0b      - 

 000102ff  OFF   -    ACT     --            host    0001    0b      - 

 003001ff  OFF   -    ACT     --            disk    0400    04      -

 003002ff  OFF   -    ACT     --            disk    0400    04      -

The command completed successfully