Craftsman 486.245071 User Manual

9

Assemble latch lever to rear tongue using 5/16" x 4" 

•

hex bolt and 5/16" lock nut. 

against side of rear tongue. See figure 1A. 

Attach the spring to the hole in the latch lock lever 

•

and the hole in the tongue. See figure 1B.

Assemble the rear tongue to the wheel support by 

•

sliding the axle through the holes in the tongue and 
wheel support as shown in figure 2.

Assemble an axle clip, wheel (valve stem facing out) 

•

washer, and a second washer (if space allows) onto 
the axle as shown in figure 3. Secure the wheel in 
place using a cotter pin. Repeat for other wheel.

Assemble the latch stand plate and latch stand 

•

bracket (with alignment tab toward rear of cart) to the 
cart try using four 1/4" x 3/4" hex bolts, 1/4" washers 
and 1/4" nylock nuts. 

Tighten nuts after all bolts are 

in place. See figure 4.