Conair MPA User Manual
Water-cooled models use tube-in-tube heat exchangers to
condense the hot, compressed, refrigerant gas from the
compressor to a cool liquid.
condense the hot, compressed, refrigerant gas from the
compressor to a cool liquid.
The cool liquid refrigerant passes through a filter/dryer,
which protects the system from moisture or other contami-
nants. An in-line sight glass gives a visual indication of
proper refrigerant charge and any dangerous moisture pre-
sent in the system.
which protects the system from moisture or other contami-
nants. An in-line sight glass gives a visual indication of
proper refrigerant charge and any dangerous moisture pre-
sent in the system.
The refrigerant passes through a thermal expansion valve,
where it expands, cools and is precisely metered into the
refrigerant heat exchanger (evaporator).
where it expands, cools and is precisely metered into the
refrigerant heat exchanger (evaporator).
The evaporator removes the heat from the process fluid.
H
OW IT
W
ORKS
:
W
ATER
C
OOLED
UGH004/0999
microKool Portable Chillers
D
ESCRIPTION
2-3
Typical water-cooled plumbing diagram