Dacor DH3606S User Manual
6
• For maximum stability, the hood must be attached at
the top and the back.
• Determine the number, size and type of fasteners/
anchors required to attach the hood permanently to the
wall and the ceiling/overhead cabinet. Use the weight
on page 3 and the mounting surface materials to
help determine the size(s) and type(s) required.
• Make sure the mounting surfaces are able to handle
the full weight of the hood. Reinforce if necessary.
Mounting Location Preparation
wArning
• Do not install the range hood unless the electrical
service provided meets the range hood specifications.
The electrical service to the range hood should be
installed only by a licensed electrician.
• Observe all governing codes and ordinances during
site preparation and installation. Contact your local
building department for further information.
• Failure to properly anchor the hood to the wall may
result in personal injury due to the unit falling off the
wall.
• A qualified technician must complete the installa-
tion of this built-in appliance. More than one person
is required to raise the hood into place. The owner
is responsible to make sure the hood is properly
installed.
• To avoid an electric shock hazard and property dam-
age, locate electric wires and water pipes and avoid
drilling or cutting in the vicinity.
Installation Instructions
Verify the Package Contents
Unpack the parts box and verify that all parts have been
included according to the parts list. If any item is missing
or damaged, please contact the dealer immediately. Do not
install a damaged or incomplete appliance.
Make sure you have everything necessary for proper instal-
Make sure you have everything necessary for proper instal-
lation before proceeding.
Parts List
•
Light bulbs (2)
•
Hood assembly with filters
•
Light replacement tool
•
Literature
•
Dacor Stainless Steel Cleaner
A
A
B
B
C
C
D
D
E
E
STAINLESS
STEEL
CLEANER