Clifford 590.4x User Manual

42

© 2011 Directed Electronics. All rights reserved.

perature changes. If a change in temperature is detected this report 
will be sent to the remote for display. Each time the remote receives 
this report it will beep, update, and display the newest temperature 
information in the Status screen info center. 

Note

Temperature report must be turned on by an authorized Di-
rected dealer.

Remote Start Time-out Alert

During remote start a message is sent three minutes before 
and again at one minute before the engine turns off. The 

 

 animation and tones play as an alert 

to reset the runtime if desired.

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires 
that the MTS mode is properly set when parking. If MTS mode is not 
properly set or is defeated after being properly set the system will 
not start the engine and the 

 screen and 

tones play as an alert.

1.  With the engine running, set the parking brake and leave the 

engine running. For Pit Stop or Turbo Timer mode (to leave the 
engine running after arming) open the driver door.

2.  Release the foot brake (if pressed during Step 1), or press and 

release the foot brake anytime. As long as the engine is running 
there is no time limit to perform this step.

3.  Within 20 seconds of foot brake release, press any command 

button on the remote, after 20 seconds return to Step 2 (For Turbo 
Timer Mode, press the optional dash mounted activation button 
or send the Timer Mode command from the Advanced Start menu