Brother HL-2400CEN User Manual

USER’S GUIDE

4–74

 

4.

Press the 

 button to make the displayed selection effective.

 

The printer is reset according to the selected reset mode.

 

 RESET PRINTER

 08 RESET TO 

↔

USER SETTINGS

 RESET  SETTING  1-2

 08 RESET TO 

↔

SETTING # 1*

 FACTORY  SETTINGS

 09 RESET TO 

↔

FACTORY

SETTINGS

 
 

1* - # indicates the selected number of saved settings

 
 

The printer automatically exits from the reset mode to the on-

line state.

 
 

5.

When you enter the RESET PARTS LIFE mode:

 

 FC  ROLLER

 Fuser  Cleaner

 OPC  BELT

 (OPC)  Belt  Cartridge

 FUSER UNIT

 Fixing Unit

 120K  KIT

 Drum  Cleaner,  Paper  Discharge,
Transfer Roller

 
 The reset item is selected according to the Maintenance message that
shows the currently recommended part to replace. Press 

 to reset

the parts life. See Chapter 5 for more detailed information.

 

 
 The following table shows the factory settings made before shipment.
 

 ✒  Notes

• 

The settings are subject to the emulation mode. Effective modes are
indicated in parentheses in the following table.

• 

The following settings cannot be restored to the factory settings with
the 

 button in the “FACTORY SETTINGS” mode:

INTERFACE MODE, HRC SETTING, PAGE PROTECTION,
SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local
LANGUAGE for display messages.

• 

The COPY setting is always restored to the factory setting when the
printer is turned off and on again.

• 

The user settings are overwritten after resetting to User Settings 1 or
2.