Bosch she47c User Manual

·  When the leD display shows a “00” or a “01” release both buttons. 

·  to enable the additional Drying Heat, press the left “Cancel Drain” button until the leD 

display shows a “01”. 

·  to disable the additional Drying Heat, press the left “Cancel Drain” button until the leD 

display shows a “00”. 

·  press the on/off button to save the setting.

this option allows you to delay the start time of your dishwasher.

to activate: 

·  turn the dishwasher on.
·  select the desired wash cycle.
·  press and hold the Delay start button. release when the desired delay time is shown in 

the display window.

this Cycle Completion signal is a tone that sounds to alert you when your dishwasher 
finishes washing and drying your dishes. You can either disable the tone or set the volume.

to activate:

·  press and hold the right “Cancel Drain” button then press and hold the on/off button.
·  When the light on the “Cancel Drain” button you are pressing illuminates and the tone 

begins to sound, release both buttons.

·  press the right-most “Cancel Drain” button until the tone is either at the desired 

volume or is silent.

·  press the on/off Button. the Cycle Completion signal is now set.

this feature senses when the unit is low on rinse agent and automatically increases the 
drying time. for best performance, always use a liquid rinse agent even if your detergent 
contains a drying additive.

ECO function (select models): this option saves energy by reducing water temperature.

to start the dishwasher, follow the instructions in figures 19 and 20 depending the control 
location.

NOTE: should you need to interrupt a cycle (to add or remove an item, to add detergent, 
etc.), it is best to do so within the first 30 minutes of the cycle.
Exposed Front Controls (see figure 19) 

1.  press the on/off button to turn the unit off.
2.  Wait at least ten seconds or until the water noises stop before opening the 

dishwasher door.

3.  to resume the cycle, close the dishwasher door and then press the on/off button. 

Hidden Top Controls (see figure 20) 

1.  open the dishwasher door just far enough to expose the control panel.
2.  press the on/off button to turn the unit off.
3.  Wait at least ten seconds or until the water noises stop before opening the 

dishwasher door.

4.  to resume the cycle, press the on/off button and close the dishwasher door.

WARNING

 

Wait at least ten seconds or until water noises stop before opening the dishwasher door. to 

1) Close the door

2) turn on

3) select a cycle

4) the unit will  
 

then start

4) Close the 
  door to start

2) turn on

3) select a cycle

1) open the door

D

rY

tM