First Alert FA1220CV User Manual

CHECKING FOR OPEN ZONES

✱

Before arming your system, all protected doors, windows and other protection zones must be
closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not
Ready" message. Pressing the READY key will display all zones that are faulted, making it
easier for you to secure any open zones.

DISARMED - PRESS

Note: Some keypads light a green LED when the system

✴ 

TO SHOW FAULTS

is ready. If not lit, the system is not ready to be armed.

1.

Do not enter security code, but simply press

✱

 .

FAULT   05   FRONT

UPSTAIRS  BEDROOM

2.

DISARMED

READY TO ARM

Secure or bypass the zones displayed before arming the system.
The "Ready" message will be displayed † when all protection zones
have been either closed or bypassed.

† NOTE: All or part of this message may be replaced by a customized
message programmed by the installer.  Bear this in mind whenever the
instructions indicate that the "DISARMED" or "READY" message will be
displayed.