Fujitsu image scanner fi-5950 User Manual

9

This section explains how to check the operation of the 
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly, 
following the procedure below.

■ Checking the Operation of the 

1.

Load the document on the scanner.

For information about how to load the document, refer 

to section "2.6 Loading Documents on the ADF for 
Scanning" in the "fi-5950 Operator's Guide."

2.

Launch ScandAll PRO. 

From the [start] menu, select [All Programs] 

D

 

[Fujitsu ScandAll PRO] 

D

 [ScandAll PRO].

3.

In ScandAll PRO, select [Tool] on the menu, and 

then select [Preferences].

⇒  

The [Setup] dialog box appears.

4.

On the [Scan] tab, select a driver.

To check the operation of TWAIN driver, select 
[TWAIN].

To check the operation of the ISIS driver or Kofax 

VRS, select [ISIS/VRS].

5.

Click the [OK] button to close the [Setup] dialog 

box.

6.

In ScandAll PRO, select [Scan] on the menu, and 

then select [Select Scanner].

7.

Select a scanner in the displayed dialog box.

To use TWAIN driver:

Select [FUJITSU fi-5950d], and then click the [Select] 
button.

To use ISIS driver:

Select [Fujitsu fi-5950], and then click the [Select] 
button.

To use Kofax VRS:

Select [Kofax VRS Scanner], and then click the 
[Select] button.

8.

Select [Scan] on the menu, and then select [Scan 

Settings].

9.

In the [Scan Settings] dialog box, clear the [Save to 

file] checkbox. 

HINT

You only check the operation now, so you do 
not have to save to file.