Dynex DX-BUSB User Manual
Troubleshooting
21
If you have concerns about your network’s performance that might be related to range or
obstruction factors, try moving the computer to a position between five and 10 feet from the
wireless router (or access point) in order to see if distance is the problem. If difficulties
persist, refer to the user guide for your wireless router.
obstruction factors, try moving the computer to a position between five and 10 feet from the
wireless router (or access point) in order to see if distance is the problem. If difficulties
persist, refer to the user guide for your wireless router.
Note: While some of the items listed below can affect network performance, they will not
prohibit your wireless network from functioning. If you are concerned that your network
is not operating at its maximum effectiveness, this checklist may help.
is not operating at its maximum effectiveness, this checklist may help.
You cannot connect to the Internet wirelessly
If you are unable to connect to the Internet from a wireless computer, check the following
items:
items:
• Look at the lights on your wireless router. If you’re using a Dynex Wireless Router, the
lights should be as follows:
• The power light should be on.
• The connected light should be on, and not blinking.
• The WAN light should be either on or blinking.
• The power light should be on.
• The connected light should be on, and not blinking.
• The WAN light should be either on or blinking.
• Open your Wireless Networking Utility (WNU) software by clicking on the icon in the
system tray at the bottom right corner of the screen. The tray icon should look like this
(the icon may be red or green):
(the icon may be red or green):
• The window that opens should have a list of Available Networks. Available networks
are wireless networks to which you can connect.
If you are using a Dynex 802.11g (54g) router, Dynex54g is the default name.
If you are using a Dynex 802.11b router, the default name should be WLAN.
If you are NOT using a Dynex router please consult your router manufacturer’s user
guide for the default name.
The name of your wireless network appears in Available Networks list.
If you are using a Dynex 802.11g (54g) router, Dynex54g is the default name.
If you are using a Dynex 802.11b router, the default name should be WLAN.
If you are NOT using a Dynex router please consult your router manufacturer’s user
guide for the default name.
The name of your wireless network appears in Available Networks list.
If the correct network name is listed in the Available Networks list, follow these steps to
connect wirelessly:
connect wirelessly:
1 Click on the correct network name in the Available Networks list.
2 If the network has security (encryption) enabled, enter the network key. For more
2 If the network has security (encryption) enabled, enter the network key. For more
information regarding security, see “Securing your Wi-Fi® Network” on page 12.
3 Within a few seconds, the tray icon in the lower right corner of your screen should turn
green, indicating a successful connection to the network.