Insignia NS-S6901 User Manual
3
www.insignia-products.com
Insignia NS-S6901
6'' × 9'' Car Stereo
Speakers
Introduction
Congratulations on your purchase of a
high-quality Insignia product. Your NS-S6901
Car Stereo Speakers represent the state of the
art in car speaker design, and are designed for
reliable and trouble-free performance.
high-quality Insignia product. Your NS-S6901
Car Stereo Speakers represent the state of the
art in car speaker design, and are designed for
reliable and trouble-free performance.
Safety information
•
This
User Guide contains important
instructions for your safety. Make sure that
you refer to it.
you refer to it.
•
Do not install the speakers where they may
be subjected to excessive heat, moisture, or
dust, or where they will be kicked repeatedly,
brushed, or bumped.
be subjected to excessive heat, moisture, or
dust, or where they will be kicked repeatedly,
brushed, or bumped.
•
To prevent a short circuit, never leave any
metal objects, such as coins or metal tools,
inside the acoustic system.
metal objects, such as coins or metal tools,
inside the acoustic system.
•
Make absolutely sure that the positive (+) and
negative (-) terminals of the speakers are
connected to the correct outputs from the
music source.
negative (-) terminals of the speakers are
connected to the correct outputs from the
music source.
•
Never run the wiring on the outside of, or
under, the vehicle, where it can be damaged
by road hazards or moving parts of the
vehicle. Use existing wire channels, sills,
panels, and moulding strips inside the vehicle
to hide the wiring for safety and a neat
appearance.
under, the vehicle, where it can be damaged
by road hazards or moving parts of the
vehicle. Use existing wire channels, sills,
panels, and moulding strips inside the vehicle
to hide the wiring for safety and a neat
appearance.
•
When your speakers are connected, turn on
the various components and slowly turn up
the volume. Make sure that you check and
double-check all connections to insure
correct installation and use.
the various components and slowly turn up
the volume. Make sure that you check and
double-check all connections to insure
correct installation and use.
•
Do not overload the speakers beyond their
nominal power handling capacity.
nominal power handling capacity.
•
Keep recorded tapes, watches, and personal
credit cards using magnetic coding away
from the speakers to protect them from
damage caused by the magnets in the
speakers.
credit cards using magnetic coding away
from the speakers to protect them from
damage caused by the magnets in the
speakers.
•
If you cannot find an appropriate mounting
location, consult your car or sound system
dealer before mounting.
location, consult your car or sound system
dealer before mounting.
Features
Included:
•
6'' × 9'' speakers (2)
•
Speaker wire
mounting leads
•
Mounting screws (8)
•
Mounting clips (8)
Dimensions
Troubleshooting
Always test the speakers and speaker wires.
Make sure that the speakers are connected with
the correct polarity (positive (+) amplifier output
to positive (+) speaker terminal and negative (-)
amplifier output to negative (-) speaker terminal).
Make sure that the speakers are connected with
the correct polarity (positive (+) amplifier output
to positive (+) speaker terminal and negative (-)
amplifier output to negative (-) speaker terminal).
Specifications
Warning
•
Before mounting the speakers and connecting
the wires, make sure that the negative battery
cable is disconnected from the battery. Failure
to do this may cause a short circuit or fire.
the wires, make sure that the negative battery
cable is disconnected from the battery. Failure
to do this may cause a short circuit or fire.
•
Use extreme caution when working near the
gas tank, gas lines, or hydraulic lines with
electrical wiring.
gas tank, gas lines, or hydraulic lines with
electrical wiring.
Frequency
60-20 kHz
Sensitivity
90dB/W/M
Peak power
150 W
Magnet
30 oz.
Voice coil
1.38 in (35 mm)
Woofer
Electroplate IMPP cone
Midrange and
Tweeter
Tweeter
2.28 in (58 mm) Mylar dome tweeter, 1.18 in
(30 mm) Mylar dome tweeter, and .78 in
(20 mm) piezo tweeter
(30 mm) Mylar dome tweeter, and .78 in
(20 mm) piezo tweeter
Impedance
4 ohms
7/26 in
184.
5 m
m
)
4.72 in
(120 mm)
(120 mm)
6.
0
2
in
(153
mm
)
3.
89 in
(9
9
mm
)
3
.13 in
(79.
5 m
m
)
8.74 in
(222 mm)
(222 mm)
4
.76 in
(121 m
m
)
0.177 in
(4.50 mm)
(4.50 mm)
6.57 in
(167 mm)
(167 mm)
10.35 in
(263 mm)
(263 mm)