Fujitsu p17-2 User Manual
SCENICVIEW P17-2 / P19-2 / P20-2
10
Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our help desk.
monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our help desk.
Having this problem?
Check the following points:
No screen display
(power indicator does not light)
(power indicator does not light)
►
Check whether the main switch at the rear of the
monitor is switched on.
monitor is switched on.
►
Check whether the power cable on the monitor is
connected correctly.
connected correctly.
►
Check whether the computer is switched on.
No screen display
(power indicator lights)
(power indicator lights)
►
Check whether the computer is switched on.
►
Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
correctly attached to the monitor port on the
computer.
►
Press any key on the computer keyboard - the
computer may be in energy saving mode.
computer may be in energy saving mode.
►
Alter the brightness and/or contrast until you get a
picture.
picture.
Message:
No Signal
No Signal
►
Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
correctly attached to the monitor port on the
computer.
►
Check whether the computer is switched on.
Message:
Frequency out of range:
Frequency out of range:
## kHz / ## Hz
Please change the display mode
Please change the display mode
to 1280 x 1024 with 60 Hz.
Please change the display mode
Please change the display mode
to 1600 x 1200 with 60 Hz.
The input signal (horizontal frequency and refresh rate)
at the displayed input does not correspond to the
technical monitor data.
►
at the displayed input does not correspond to the
technical monitor data.
►
Adjust the video frequency range using the
computer software (see documentation for your
computer or your graphics card).
computer software (see documentation for your
computer or your graphics card).
►
Adjust a different screen resolution using the
computer software (see documentation for your
computer or your screen controller).
P17-2/P19-2
computer software (see documentation for your
computer or your screen controller).
P17-2/P19-2
P20-2
1280 x 1024
1600 x 1200
Picture position not correct
The monitor recognises an undefined mode (see the
"Technical data" chapter). ►
"Technical data" chapter). ►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.
Picture is shaking
►
Check whether the data cable for the monitor is
correctly attached to the monitor port on the
computer.
correctly attached to the monitor port on the
computer.
►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.