Fujitsu p17-2 User Manual

SCENICVIEW P17-2 / P19-2 / P20-2 

 

4 

When putting the monitor into operation for the first time, the screen display should be optimally 
adapted to the screen controller used and adjusted in accordance with your needs. 

If one of the operating systems Windows 95/98, Windows NT, Windows Me, Windows 2000, 
Windows XP or OS/2 (with Windows emulation installed) is used, the basic monitor settings can be 
set with the CD supplied. 
► 

Insert the supplied CD into the CD-ROM drive. 

► Open 

the 

Readme file on the CD and follow the instructions in the file. 

Your monitor should now already be properly adjusted. If none of the above operating systems is 
used or minor corrections are to be made to the screen display, then change the monitor settings 
with the OSD menu. 

2

1

3

 

1 =   Buttons for the OSD menu 

(On-Screen-display) 

2 =   ON/OFF switch 
3 =   Power indicator 

 

Use the buttons of the control panel to make the following monitor settings directly while the OSD 
menu is switched off. 

Performing auto-adjustment of the monitor 
► 

Press the AUTO button for approx. 1 second while the OSD menu is switched off. 

The Auto Processing message is displayed. 
Picture quality and position are set to optimum values for your system. 

Selecting input signal (D-SUB/DVI-D) 
► 

Press the INPUT button for calling the Input select setting window. 

► Press 

the 

6

 or 

5

 button to select the desired input (analogue D-SUB or digital DVI-D). 

This setting window can also be called, when the OSD menu is locked. 

Activating/deactivating muting 
► Press 

the   button to switch the sound off and on again. 

A message is displayed that the action has been performed.